Type: Single Post Lift

Description:
The Braun Vangater II mounts on the left side of the passenger side doors. The operator opens the vehicle's doors and activates the toggle switch to the unfold position. The platform unfolds automatically and stops. The operator releases and reactivates the same switch which enables the unfold function until the platform is horizontal. The bridgeplate will deploy when the platform reaches the horizontal position. The operator once again releases and reactivates the toggle switch enabling the down function. The lift will automatically stop at ground level and deploy the outboard roll stop. After boarding, the operator activates the toggle switch in the stow direction. The outboard roll stop raises up and the platform slightly levels. Then the platform rises, elevating the wheelchair passenger from the ground up to the floor of the van. The lift stops automatically at floor level and deploys the bridgeplate. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt electrical motor. A gear-driven ball screw assembly drives the lifting mechanism to raise or lower the platform. It features a powered bridgeplate and outboard roll stop which act as loading and unloading ramps when deployed.
User Requirements:
The Vangater II can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
Advantages:
The automatic tri-folding platform provides access through the side door without having to bring the lift out and down. The front passenger seat can be fully reclined. Variable speed settings allows the dealer to set your preferred up and down speed.
Limitations:
Specifications:
Accessories:
Manufacturers:


Type: Single Post Lift - Mini Vans Only

Description:
The Braun Mini-Vangater mounts on the left side of the passenger side doors. The operator opens the vehicle's door and activates the platform fold/unfold switch to unstow the platform into the horizontal position. For boarding, the lift is lowered to ground level by activating the lift up/down switch. After boarding, the front safety stops automatically engage as the platform is raised. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt electrical motor. A gear-driven ball screw assembly drives the lifting mechanism to raise or lower the platform. It incoporates a passively activated front gate which acts as the loading and unloading platform, with side panels.
User Requirements:
The Mini-Vangater can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
Advantages:
The manual bi-fold platform provides access through the side door without having to bring the lift out and down. The front passenger seat can be fully reclined. Variable speed settings allows the dealer to set your preferred up & down speed.
Limitations:
Specifications:
Accessories:
Manufacturers:


Type: Under Vehicle Lift (UVL)

Description:
The Braun UVL wheelchair lift mounts on the outside underneath the passenger side doors. The operator opens the vehicle's doors and activates the hand held pendant to electrically extend the lift out. The lift is then hydraulically raised to the interior floor height. To lower the lift, activate the hand held pendant which then lowers the platform by gravity. Once the platform is at ground level the front barrier flap lowers.

Safety features ensure that the lift will not stow under the vehicle as long as a passenger is on the platform.
User Requirements:
The UVL can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
The UVL will only work on the Ford, Chevrolet/GMC or Dodge Standard and extended size vans. 1/2 tons can be used but require suspension and exhaust modifications for proper height of the lift. 3/4 or 1 tone usually do not need these modification. The UVL will work with standard floors or lowered floors and slider or hinged doors.
Advantages:
Full use of interior space with no door blockage. The lift is hidden from view, fully enclosed and protected from outside elements. The front passenger seat can be fully reclined. Midship captain chair in some cases can be used. The UVL is quiet while being operated.
Specifications:
 
Accessories:
 
Manufacturers:

Type: Dual Post Platform
 

Description:
The dual post platfrom lift mounts to the floor either through the passenger side door or rear doors. The operator opens the vehicle's door and activates the platform fold/unfold switch to unstow platform into the horizontal position. For boarding, the lift is lowered to ground level by activating the lift from the pendant or handrail switch. After boarding, the front safety stops automatically engage as the platform is raised. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt electrical motor. A gear-driven ball screw assembly drives the lifting mechanism to raise or lower the platform. It incoporates a passively activated front gate which acts as the loading and unloading platform, with side panels.
User Requirements:
The dual post platform lift can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
 
Advantages:
 
Limitations:
 
Specifications:
 
Accessories:
 
Manufacturers:

Type: Dual Post Platform

Description:
The Unilite dual post platfrom lift mounts to the floor either through the passenger side door or rear doors. The operator opens the vehicle's door and activates the platform fold/unfold switch to unstow platform into the horizontal position. For boarding, the lift is lowered to ground level by activating the lift from the pendant or handrail switch. After boarding, the front safety stops automatically engage as the platform is raised. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt high-torque electrical motor. A chain drive system operates the lifting mechanism to raise or lower the platform. It incoporates a passively activated front gate which acts as the loading and unloading platform, with side panels.
User Requirements:
The dual post platform lift can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
 
Advantages:
 
Limitations:
 
Specifications:
 
Accessories:
 
Manufacturers:

Type: Dual Post Folding Platform

Description:
The dual post folding platfrom lift mounts to the floor through the passenger side door. The operator opens the vehicle's door and activates the platform fold/unfold switch to unstow platform into the horizontal position. For boarding, the lift is lowered to ground level by activating the lift from the pendant or handrail switch. After boarding, the front safety stops automatically engage as the platform is raised. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt electrical motor. An electro hydraulic motor operates the lifting mechanism to raise or lower the platform. It incoporates a passively activated front gate which acts as the loading and unloading platform, with side panels.
User Requirements:
The dual post platform lift can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
 
Advantages:
 
Limitations:
 
Specifications:
 
Accessories:
 
Manufacturers:

Type: Dual Post Split Platform
 

Description:
The dual post split platfrom lift mounts to the floor either through the passenger side door or rear doors. The operator opens the vehicle's door and activates the platform fold/unfold switch to unstow platform into the horizontal position. As split platform unstows both sides lower & lock together at horizontal position.For boarding, the lift is lowered to ground level by activating the lift from the pendant or handrail switch. After boarding, the front safety stops automatically engage as the platform is raised. After the user/passenger has exited the platform, the switch can be activated again to fold and stow the platform.

The lift is powered by a 12 volt electro hydraulic motor.
User Requirements:
The dual post split platform lift can be operated either by the wheelchair user if capable or by the aid of an attendant.
Vehicle Requirements:
 
Advantages:
Limitations:
Specifications:
 
Accessories:
 
Manufacturers:

For information on the above
please contact us at 602-286-0332

 

Vehicles for Sale        Mobility Equipment        Rental Vans
About Us        Contact Us        Rebates        Industry Information     Home